24144EMBW27W40EW904产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Design Unit | Metric | |
| Bearing Weight | 64.3000 Kg | |
| Bearing Weight | 141.8000 lb | |
| Cage Type | EMB | |
| Cage Material | BRASS | |
| Superseded Part | 24144YMBW27W40EW904 | |
| D - Outer Diameter | 370.000 mm | |
| D - Outer Diameter | 14.5669 in | |
| d - Bore | 220.000 mm | |
| d - Bore | 8.6614 in | |
| B' - Inner Ring Width | 150.000 mm | |
| B' - Inner Ring Width | 5.9055 in | |
| B - Outer Ring Width | 150.000 mm | |
| B - Outer Ring Width | 5.9055 in | |
| Z - Number of Rollers Per Row | 20 | |
| R - Inner Ring "To Clear" Radius | 6.70 mm | Maximum housing fillet radius that bearing corners will clear. |
| R - Inner Ring "To Clear" Radius | 0.26 in | Maximum housing fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 3.00 mm | Maximum shaft fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 0.12 in | Maximum shaft fillet radius that bearing corners will clear. |
| da - Inner Ring Backing Diameter | 248.3 mm | |
| da - Inner Ring Backing Diameter | 9.78 in | |
| Da - Outer Ring Backing Diameter | 336.8 mm | |
| Da - Outer Ring Backing Diameter | 13.26 in | |
| D1 - Outer Ring Breakout Diameter | 317.500 mm | |
| D1 - Outer Ring Breakout Diameter | 12.5000 in | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 2250000 N | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 506000 lbf | |
| C0 - Static Radial Rating | 3220000 N | |
| C0 - Static Radial Rating | 725000 lbf | |
| e - ISO Factor | 0.36 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y0 - ISO Factor | 1.86 | These factors apply for both inch and metric calculations. See engineering |
| Y1 - ISO Factor | 2.77 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y2 - ISO Factor | 1.82 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Reference Thermal Speed Rating (Grease) | 720 | |
| Reference Thermal Speed Rating (Oil) | 780 | See thermal speed ratings in the engineering section. |
| Cg - Geometry Factor | 0.0756 | Geometry constant for Lubrication Life Adjustment Factor a3l. |
