SNT 3080F - 23080K - TA80产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Housing | SNT 3080F | |
| Bearing | 23080K | |
| Locating Rings (width x OD) | FIXED HOUSING | |
| Seal Type | Taconite | |
| Seal | TA80 | |
| Adapter Sleeve | H3080 | |
| Locknut | HM3080 | |
| Lockwasher | MS3080 | |
| End Cover | EC80 | Two seals are required for a thru shaft application. One end cover can be used if application is not a thru shaft design. In this case, only one seal is required. |
| Material | Cast Iron | |
| Housing Mass | 454 Kg | |
| Bolt Qty | 4 | |
| Cage Type | YMB | |
| C1 Dynamic Load Rating | 3310 | |
| C0 Static Load Rating | 5950 | |
| Max Oil Speed | 690 | |
| Max Grease Speed | 590 | |
| Shaft Diameter d | 380 mm | |
| A | 400 mm | |
| A1 | 360 mm | |
| A3 | 495 mm | |
| C | 30 mm | |
| G | M36 | |
| H | 695 mm | |
| H1 | 350 mm | |
| H2 | 120 mm | |
| J | 840 mm | |
| J1 | 220 mm | |
| L | 1040 mm | |
| N | 42 mm | |
| N1 | 50 mm |
