参数 |
数据 |
说明 |
Series |
2800 |
|
Cone Part Number |
2878 |
|
Cup Part Number |
2820 |
|
Design Units |
Imperial |
|
Bearing Weight |
1.0000 lb |
|
Bearing Weight |
0.4000 Kg |
|
Cage Type |
Stamped Steel |
|
D - Cup Outer Diameter |
2.8750 in |
|
D - Cup Outer Diameter |
73.025 mm |
|
d - Cone Bore |
1.3750 in |
|
d - Cone Bore |
34.925 mm |
|
B - Cone Width |
0.9375 in |
|
B - Cone Width |
23.813 mm |
|
C - Cup Width |
0.6875 in |
|
C - Cup Width |
17.463 mm |
|
T - Bearing Width |
0.8750 in |
|
T - Bearing Width |
22.225 mm |
|
Z - Number of Rollers Per Row |
17 |
|
R - Cone Backface "To Clear" Radius |
0.030 in |
These maximum fillet radii will be cleared by the bearing corners. |
R - Cone Backface "To Clear" Radius |
0.760 mm |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Backface "To Clear" Radius |
0.130 in |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Backface "To Clear" Radius |
3.30 mm |
These maximum fillet radii will be cleared by the bearing corners. |
da - Cone Frontface Backing Diameter |
1.61 in |
|
da - Cone Frontface Backing Diameter |
40.89 mm |
|
db - Cone Backface Backing Diameter |
1.65 in |
|
db - Cone Backface Backing Diameter |
41.91 mm |
|
Da - Cup Frontface Backing Diameter |
2.72 in |
|
Da - Cup Frontface Backing Diameter |
68.10 mm |
|
Db - Cup Backface Backing Diameter |
2.48 in |
|
Db - Cup Backface Backing Diameter |
62.99 mm |
|
Ab - Cage-Cone Frontface Clearance |
0.01 in |
|
Ab - Cage-Cone Frontface Clearance |
0.25 mm |
|
Aa - Cage-Cone Backface Clearance |
0.04 in |
|
Aa - Cage-Cone Backface Clearance |
1.02 mm |
|
a - Effective Center Location |
-0.22 in |
Negative value indicates effective center inside cone backface. |
a - Effective Center Location |
-5.60 mm |
Negative value indicates effective center inside cone backface. |
C90 - Dynamic Radial Rating (90 million revolutions) |
4260 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
C90 - Dynamic Radial Rating (90 million revolutions) |
19000 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
C1 - Dynamic Radial Rating (1 million revolutions) |
16400 lbf |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C1 - Dynamic Radial Rating (1 million revolutions) |
73200 N |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C0 - Static Radial Rating |
18800 lbf |
|
C0 - Static Radial Rating |
83800 N |
|
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
2690 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
12000 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
K - Factor |
1.59 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
e - ISO Factor |
0.37 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y - ISO Factor |
1.63 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G1 - Heat Generation Factor (Roller-Raceway) |
23.1 |
|
G2 - Heat Generation Factor (Rib-Roller End) |
12.4 |
|
Cg - Geometry Factor |
0.0718 |
|