TIMKEN（铁姆肯）

您的位置：

EE128110 - 128160-B TIMKEN 圆锥滚子轴承

专业销售TIMKEN圆锥滚子轴承EE128110 - 128160-B，并且为客户提供属于TIMKEN圆锥滚子轴承。本公司专业提供TIMKEN圆锥滚子轴承全系列产品。并且提供对此类产品的起重机、角接触向心轴承、可互换分部件、轴承外径、套圈(垫圈)倒角尺寸、等具体参数。构成元素：系列法兰 TSF 带 128160-B EE128110 。类似型号：SNW-3026 x 4 1/2、 UCT208-25、紧定套 HA3126QAAPL20A100S、 558 - 552-B、推卸套 AH3076G、轴承附件 SNW-40 x 7 1/4、TIMKEN SNT 518-615 - 21315K - TSNG615 TIMKEN HE2334 TIMKEN QAACW13A060S 产品应用：传统发电、能源与发电、医疗保健、电动机（电机）、自动化。应用设备：保鲜冷藏设备、螺杆泵、切胶机、压花机、豆粉设备、磨具/磨料/抛光机、茶饮料设备、水杀菌消毒设备、表面处理设备、工程机械配件。

型号

尺寸图
型号列表
规格表
供应商

EE128110 - 128160-B产品参数

参数	数据	说明
Series	128000
Cone Part Number	EE128110
Cup Part Number	128160-B
Design Units	Imperial
Bearing Weight	63.8000 lb
Bearing Weight	29.0000 Kg
Cage Type	Pin-Type
D - Cup Outer Diameter	16.0000 in
D - Cup Outer Diameter	406.400 mm
D1 - Flange Outer Diameter	16.4960 in
D1 - Flange Outer Diameter	418.998 mm
d - Cone Bore	11.0312 in
d - Cone Bore	280.192 mm
B - Cone Width	2.6643 in
B - Cone Width	67.673 mm
C - Cup Width	2.1250 in
C - Cup Width	53.975 mm
C1 - Cup Flange Width	0.5000 in
C1 - Cup Flange Width	12.700 mm
T1 - Bearing Width	2.7500 in
T1 - Bearing Width	69.850 mm
T - Bearing Width to Flange	1.1250 in
T - Bearing Width to Flange	28.575 mm
Z - Number of Rollers Per Row	35
R - Cone Backface "To Clear" Radius	0.270 in	These maximum fillet radii will be cleared by the bearing corners.
R - Cone Backface "To Clear" Radius	6.900 mm	These maximum fillet radii will be cleared by the bearing corners.
r - Cup Backface "To Clear" Radius	0.130 in	These maximum fillet radii will be cleared by the bearing corners.
r - Cup Backface "To Clear" Radius	3.30 mm	These maximum fillet radii will be cleared by the bearing corners.
da - Cone Frontface Backing Diameter	12.09 in
da - Cone Frontface Backing Diameter	307.10 mm
db - Cone Backface Backing Diameter	12.17 in
db - Cone Backface Backing Diameter	309.10 mm
Da - Cup Frontface Backing Diameter	15.13 in
Da - Cup Frontface Backing Diameter	384.05 mm
Ab - Cage-Cone Frontface Clearance	0.06 in
Ab - Cage-Cone Frontface Clearance	1.50 mm
Aa - Cage-Cone Backface Clearance	0.27 in
Aa - Cage-Cone Backface Clearance	6.90 mm
a - Effective Center Location	0.26 in	Negative value indicates effective center inside cone backface.
a - Effective Center Location	6.60 mm	Negative value indicates effective center inside cone backface.
C90 - Dynamic Radial Rating (90 million revolutions)	53900 lbf	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
C90 - Dynamic Radial Rating (90 million revolutions)	240000 N	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
C1 - Dynamic Radial Rating (1 million revolutions)	208000 lbf	Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
C1 - Dynamic Radial Rating (1 million revolutions)	924000 N	Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
C0 - Static Radial Rating	409000 lbf
C0 - Static Radial Rating	1820000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)	35600 lbf	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
Ca90 - Dynamic Thrust Rating (90 million revolutions)	158000 N	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
K - Factor	1.51	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
e - ISO Factor	0.39	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
Y - ISO Factor	1.55	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
G1 - Heat Generation Factor (Roller-Raceway)	1730	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
G2 - Heat Generation Factor (Rib-Roller End)	255
Cg - Geometry Factor	0.163	Geometry constant for Lubrication Life Adjustment Factor a3l.