参数 |
数据 |
说明 |
Series |
675 |
|
Cone Part Number |
683XA |
|
Cup Part Number |
672D |
|
Design Units |
Imperial |
|
Bearing Weight |
17.6556 lb |
|
Bearing Weight |
8.0084 Kg |
|
Cage Type |
Stamped Steel |
|
D - Cup Outer Diameter |
6.6250 in |
|
D - Cup Outer Diameter |
168.275 mm |
|
d - Cone Bore |
3.7500 in |
|
d - Cone Bore |
95.250 mm |
|
B - Cone Width |
1.6250 in |
|
B - Cone Width |
41.275 mm |
|
C - Double Cup Width |
2.7500 in |
|
C - Double Cup Width |
69.850 mm |
|
T - Bearing Width across Cones |
3.6250 in |
|
T - Bearing Width across Cones |
92.075 mm |
|
Z - Number of Rollers Per Row |
23 |
|
Ka - Locking Pin Diameter |
N/A |
|
Kb - Locking Pin Depth |
N/A |
|
R - Cone Backface "To Clear" Radius |
0.200 in |
These maximum fillet radii will be cleared by the bearing corners. |
R - Cone Backface "To Clear" Radius |
5.100 mm |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Frontface "To Clear" Radius |
0.03 in |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Frontface "To Clear" Radius |
0.8 mm |
These maximum fillet radii will be cleared by the bearing corners. |
db - Cone Backface Backing Diameter |
4.57 in |
|
db - Cone Backface Backing Diameter |
116.10 mm |
|
Da - Cup Frontface Backing Diameter |
6.34 in |
|
Da - Cup Frontface Backing Diameter |
160.02 mm |
|
Aa - Cage-Cone Backface Clearance |
0.20 in |
|
Aa - Cage-Cone Backface Clearance |
5.10 mm |
|
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
15400 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
68600 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
104000 lbf |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
461000 N |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
26900 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
119000 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
12400 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
55300 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
K - Factor |
1.24 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
e - ISO Factor |
1.04 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y1 - ISO Factor |
0.65 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y1 - ISO Factor |
0.96 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y2 - ISO Factor |
0.96 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G1 - Heat Generation Factor (Roller-Raceway) |
182 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G2 - Heat Generation Factor (Rib-Roller End) |
37.2 |
|
Cg - Geometry Factor |
0.106 |
Geometry constant for Lubrication Life Adjustment Factor a3l. |