参数 |
数据 |
说明 |
Series |
L68100 |
|
Cone Part Number |
JL68145 |
|
Cup Part Number |
JL68111-Z |
|
Design Units |
Metric |
|
Bearing Weight |
0.200 Kg |
|
Bearing Weight |
0.400 lb |
|
Cage Type |
Stamped Steel |
|
D - Cup Outer Diameter |
60.000 mm |
|
D - Cup Outer Diameter |
2.3622 in |
|
d - Cone Bore |
35.000 mm |
|
d - Cone Bore |
1.3780 in |
|
B - Cone Width |
18.460 mm |
|
B - Cone Width |
0.7268 in |
|
C - Cup Width |
11.938 mm |
|
C - Cup Width |
0.4700 in |
|
T - Bearing Width |
15.875 mm |
|
T - Bearing Width |
0.6250 in |
|
Z - Number of Rollers Per Row |
23 |
|
R - Cone Backface "To Clear" Radius |
2.030 mm |
These maximum fillet radii will be cleared by the bearing corners. |
R - Cone Backface "To Clear" Radius |
0.080 in |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Backface "To Clear" Radius |
1.27 mm |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Backface "To Clear" Radius |
0.050 in |
These maximum fillet radii will be cleared by the bearing corners. |
da - Cone Frontface Backing Diameter |
39.12 mm |
|
da - Cone Frontface Backing Diameter |
1.54 in |
|
db - Cone Backface Backing Diameter |
42.42 mm |
|
db - Cone Backface Backing Diameter |
1.67 in |
|
Da - Cup Frontface Backing Diameter |
55.90 mm |
|
Da - Cup Frontface Backing Diameter |
2.24 in |
|
Db - Cup Backface Backing Diameter |
53.09 mm |
|
Db - Cup Backface Backing Diameter |
2.09 in |
|
Ab - Cage-Cone Frontface Clearance |
-1.02 mm |
|
Ab - Cage-Cone Frontface Clearance |
-0.04 in |
|
Aa - Cage-Cone Backface Clearance |
0.76 mm |
|
Aa - Cage-Cone Backface Clearance |
0.03 in |
|
a - Effective Center Location |
-2.50 mm |
Negative value indicates effective center inside cone backface. |
a - Effective Center Location |
-0.10 in |
Negative value indicates effective center inside cone backface. |
C90 - Dynamic Radial Rating (90 million revolutions) |
11800 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
C90 - Dynamic Radial Rating (90 million revolutions) |
2650 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
C1 - Dynamic Radial Rating (1 million revolutions) |
45500 N |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C1 - Dynamic Radial Rating (1 million revolutions) |
10200 lbf |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C0 - Static Radial Rating |
48700 N |
|
C0 - Static Radial Rating |
11000 lbf |
|
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
8400 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
1890 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
K - Factor |
1.4 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
e - ISO Factor |
0.42 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y - ISO Factor |
1.44 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G1 - Heat Generation Factor (Roller-Raceway) |
15.7 |
|
G2 - Heat Generation Factor (Rib-Roller End) |
14.7 |
|
Cg - Geometry Factor |
0.0657 |
|