336 - 332产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Series | 335 | |
| Cone Part Number | 336 | |
| Cup Part Number | 332 | |
| Design Units | Imperial | |
| Bearing Weight | 1.0000 lb | |
| Bearing Weight | 0.5000 Kg | |
| Cage Type | Stamped Steel | |
| D - Cup Outer Diameter | 3.1496 in | |
| D - Cup Outer Diameter | 80.000 mm | |
| d - Cone Bore | 1.6250 in | |
| d - Cone Bore | 41.275 mm | |
| B - Cone Width | 0.8820 in | |
| B - Cone Width | 22.403 mm | |
| C - Cup Width | 0.7018 in | |
| C - Cup Width | 17.826 mm | |
| T - Bearing Width | 0.8268 in | |
| T - Bearing Width | 21.001 mm | |
| Z - Number of Rollers Per Row | 15 | |
| R - Cone Backface "To Clear" Radius | 0.030 in | These maximum fillet radii will be cleared by the bearing corners. |
| R - Cone Backface "To Clear" Radius | 0.760 mm | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 0.050 in | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 1.27 mm | These maximum fillet radii will be cleared by the bearing corners. |
| da - Cone Frontface Backing Diameter | 1.81 in | |
| da - Cone Frontface Backing Diameter | 45.97 mm | |
| db - Cone Backface Backing Diameter | 1.85 in | |
| db - Cone Backface Backing Diameter | 46.99 mm | |
| Da - Cup Frontface Backing Diameter | 2.99 in | |
| Da - Cup Frontface Backing Diameter | 75.90 mm | |
| Db - Cup Backface Backing Diameter | 2.87 in | |
| Db - Cup Backface Backing Diameter | 72.90 mm | |
| Ab - Cage-Cone Frontface Clearance | 0.04 in | |
| Ab - Cage-Cone Frontface Clearance | 1.02 mm | |
| Aa - Cage-Cone Backface Clearance | 0.03 in | |
| Aa - Cage-Cone Backface Clearance | 0.76 mm | |
| a - Effective Center Location | -0.25 in | Negative value indicates effective center inside cone backface. |
| a - Effective Center Location | -6.40 mm | Negative value indicates effective center inside cone backface. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 5490 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 24400 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 21200 lbf | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 94300 N | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C0 - Static Radial Rating | 18700 lbf | |
| C0 - Static Radial Rating | 83400 N | |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 2570 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 11400 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| K - Factor | 2.14 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| e - ISO Factor | 0.27 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y - ISO Factor | 2.2 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G1 - Heat Generation Factor (Roller-Raceway) | 26.5 | |
| G2 - Heat Generation Factor (Rib-Roller End) | 13 | |
| Cg - Geometry Factor | 0.0676 |
