JH415647 - JH415610产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Series | H415600 | |
| Cone Part Number | JH415647 | |
| Cup Part Number | JH415610 | |
| Design Units | Metric | |
| Bearing Weight | 3.8000 Kg | |
| Bearing Weight | 8.4000 lb | |
| Cage Type | Stamped Steel | |
| D - Cup Outer Diameter | 145.000 mm | |
| D - Cup Outer Diameter | 5.7087 in | |
| d - Cone Bore | 75.000 mm | |
| d - Cone Bore | 2.9528 in | |
| B - Cone Width | 51.000 mm | |
| B - Cone Width | 2.0079 in | |
| C - Cup Width | 42.000 mm | |
| C - Cup Width | 1.6535 in | |
| T - Bearing Width | 51.000 mm | |
| T - Bearing Width | 2.0079 in | |
| Z - Number of Rollers Per Row | 17 | |
| R - Cone Backface "To Clear" Radius | 3.050 mm | These maximum fillet radii will be cleared by the bearing corners. |
| R - Cone Backface "To Clear" Radius | 0.120 in | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 2.54 mm | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 0.100 in | These maximum fillet radii will be cleared by the bearing corners. |
| da - Cone Frontface Backing Diameter | 88.90 mm | |
| da - Cone Frontface Backing Diameter | 3.50 in | |
| db - Cone Backface Backing Diameter | 93.98 mm | |
| db - Cone Backface Backing Diameter | 3.70 in | |
| Da - Cup Frontface Backing Diameter | 139.95 mm | |
| Da - Cup Frontface Backing Diameter | 5.51 in | |
| Db - Cup Backface Backing Diameter | 129.03 mm | |
| Db - Cup Backface Backing Diameter | 5.08 in | |
| Ab - Cage-Cone Frontface Clearance | 3.30 mm | |
| Ab - Cage-Cone Frontface Clearance | 0.13 in | |
| Aa - Cage-Cone Backface Clearance | 2.03 mm | |
| Aa - Cage-Cone Backface Clearance | 0.08 in | |
| a - Effective Center Location | -14.20 mm | Negative value indicates effective center inside cone backface. |
| a - Effective Center Location | -0.56 in | Negative value indicates effective center inside cone backface. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 89900 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 20200 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 347000 N | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 78000 lbf | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C0 - Static Radial Rating | 463000 N | |
| C0 - Static Radial Rating | 104000 lbf | |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 55700 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 12500 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| K - Factor | 1.61 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| e - ISO Factor | 0.36 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y - ISO Factor | 1.66 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G1 - Heat Generation Factor (Roller-Raceway) | 158 | |
| G2 - Heat Generation Factor (Rib-Roller End) | 26.4 | |
| Cg - Geometry Factor | 0.0931 |
