95491 - 95927CD产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Series | 95000 | |
| Cone Part Number | 95491 | |
| Cup Part Number | 95927CD | |
| Design Units | Imperial | |
| Bearing Weight | 55.3530 lb | |
| Bearing Weight | 25.1077 Kg | |
| Cage Type | Stamped Steel | |
| D - Cup Outer Diameter | 9.2500 in | |
| D - Cup Outer Diameter | 234.950 mm | |
| d - Cone Bore | 4.9190 in | |
| d - Cone Bore | 124.943 mm | |
| B - Cone Width | 2.5000 in | |
| B - Cone Width | 63.500 mm | |
| C - Double Cup Width | 4.5000 in | |
| C - Double Cup Width | 114.300 mm | |
| T - Bearing Width across Cones | 5.6249 in | |
| T - Bearing Width across Cones | 142.872 mm | |
| Z - Number of Rollers Per Row | 21 | |
| Ka - Locking Pin Diameter | 1.25 in | |
| Ka - Locking Pin Diameter | 31.8 mm | |
| Kb - Locking Pin Depth | 0.375 in | |
| Kb - Locking Pin Depth | 9.5 mm | |
| R - Cone Backface "To Clear" Radius | 0.250 in | These maximum fillet radii will be cleared by the bearing corners. |
| R - Cone Backface "To Clear" Radius | 6.400 mm | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Frontface "To Clear" Radius | 0.06 in | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Frontface "To Clear" Radius | 1.5 mm | These maximum fillet radii will be cleared by the bearing corners. |
| db - Cone Backface Backing Diameter | 5.98 in | |
| db - Cone Backface Backing Diameter | 151.90 mm | |
| Da - Cup Frontface Backing Diameter | 8.58 in | |
| Da - Cup Frontface Backing Diameter | 216.92 mm | |
| Aa - Cage-Cone Backface Clearance | 0.25 in | |
| Aa - Cage-Cone Backface Clearance | 6.40 mm | |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) | 36700 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) | 163000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) | 246000 lbf | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) | 1090000 N | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) | 63800 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) | 284000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 23200 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 103000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| K - Factor | 1.58 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| e - ISO Factor | 0.79 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y1 - ISO Factor | 0.86 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y1 - ISO Factor | 1.28 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y2 - ISO Factor | 1.28 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G1 - Heat Generation Factor (Roller-Raceway) | 454 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G2 - Heat Generation Factor (Rib-Roller End) | 59.3 | |
| Cg - Geometry Factor | 0.132 | Geometry constant for Lubrication Life Adjustment Factor a3l. |
