TIMKEN（铁姆肯）

您的位置：

6380 - 6320-B TIMKEN 圆锥滚子轴承

专业销售TIMKEN圆锥滚子轴承6380 - 6320-B，并且为客户提供属于TIMKEN圆锥滚子轴承。本公司专业提供TIMKEN圆锥滚子轴承全系列产品。并且提供对此类产品的径向(轴向)基本额定动负荷、数模转换、高炉、圆锥内圈背面挡边、套圈公称宽度、等具体参数。构成元素：单列系列法兰英制 TSF 带 6320-B 6380 。类似型号：UCT208-25、 SNW-3026 x 4 1/2、紧定套 HA3126QAAPL20A100S、 558 - 552-B、推卸套 AH3076G、轴承附件 SNW-40 x 7 1/4、TIMKEN HE2334 TIMKEN QAACW13A060S TIMKEN SNT 518-615 - 21315K - TSNG615 产品应用：食品和饮料、传统发电、冶金、医疗与保健、消费品。应用设备：电热设备、钻采设备、纺织机械、服装设备、储运设备、制药用水设备、燃气锅炉、柴油发电机组、高压水流清洗机、真空包装机、套圈。

型号

尺寸图
型号列表
规格表
供应商

6380 - 6320-B产品参数

参数	数据	说明
Series	6300
Cone Part Number	6380
Cup Part Number	6320-B
Design Units	Imperial
Bearing Weight	9.2000 lb
Bearing Weight	4.200 Kg
Cage Type	Stamped Steel
D - Cup Outer Diameter	5.3447 in
D - Cup Outer Diameter	135.755 mm
D1 - Flange Outer Diameter	5.6527 in
D1 - Flange Outer Diameter	143.579 mm
d - Cone Bore	2.1580 in
d - Cone Bore	54.813 mm
B - Cone Width	2.2050 in
B - Cone Width	56.007 mm
C - Cup Width	1.7500 in
C - Cup Width	44.450 mm
C1 - Cup Flange Width	0.3125 in
C1 - Cup Flange Width	7.938 mm
T1 - Bearing Width	2.1250 in
T1 - Bearing Width	53.975 mm
T - Bearing Width to Flange	0.6875 in
T - Bearing Width to Flange	17.463 mm
Z - Number of Rollers Per Row	15
R - Cone Backface "To Clear" Radius	0.030 in	These maximum fillet radii will be cleared by the bearing corners.
R - Cone Backface "To Clear" Radius	0.800 mm	These maximum fillet radii will be cleared by the bearing corners.
r - Cup Backface "To Clear" Radius	0.130 in	These maximum fillet radii will be cleared by the bearing corners.
r - Cup Backface "To Clear" Radius	3.30 mm	These maximum fillet radii will be cleared by the bearing corners.
da - Cone Frontface Backing Diameter	2.76 in
da - Cone Frontface Backing Diameter	70.10 mm
db - Cone Backface Backing Diameter	2.80 in
db - Cone Backface Backing Diameter	71.10 mm
Da - Cup Frontface Backing Diameter	5.00 in
Da - Cup Frontface Backing Diameter	127.00 mm
Ab - Cage-Cone Frontface Clearance	0.02 in
Ab - Cage-Cone Frontface Clearance	0.50 mm
Aa - Cage-Cone Backface Clearance	0.16 in
Aa - Cage-Cone Backface Clearance	4.10 mm
a - Effective Center Location	-0.76 in	Negative value indicates effective center inside cone backface.
a - Effective Center Location	-19.30 mm	Negative value indicates effective center inside cone backface.
C90 - Dynamic Radial Rating (90 million revolutions)	18700 lbf	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
C90 - Dynamic Radial Rating (90 million revolutions)	83300 N	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
C1 - Dynamic Radial Rating (1 million revolutions)	72300 lbf	Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
C1 - Dynamic Radial Rating (1 million revolutions)	321000 N	Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
C0 - Static Radial Rating	90900 lbf
C0 - Static Radial Rating	404000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)	10400 lbf	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
Ca90 - Dynamic Thrust Rating (90 million revolutions)	46300 N	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
K - Factor	1.8	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
e - ISO Factor	0.32	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
Y - ISO Factor	1.85	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
G1 - Heat Generation Factor (Roller-Raceway)	124	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
G2 - Heat Generation Factor (Rib-Roller End)	22.4
Cg - Geometry Factor	0.0827	Geometry constant for Lubrication Life Adjustment Factor a3l.