367 - 362A产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Series | 365 | |
| Cone Part Number | 367 | |
| Cup Part Number | 362A | |
| Design Units | Imperial | |
| Bearing Weight | 1.3000 lb | |
| Bearing Weight | 0.600 Kg | |
| Cage Type | Stamped Steel | |
| D - Cup Outer Diameter | 3.5000 in | |
| D - Cup Outer Diameter | 88.900 mm | |
| d - Cone Bore | 1.7717 in | |
| d - Cone Bore | 45.001 mm | |
| B - Cone Width | 0.8750 in | |
| B - Cone Width | 22.225 mm | |
| C - Cup Width | 0.6501 in | |
| C - Cup Width | 16.513 mm | |
| T - Bearing Width | 0.8125 in | |
| T - Bearing Width | 20.638 mm | |
| Z - Number of Rollers Per Row | 17 | |
| R - Cone Backface "To Clear" Radius | 0.080 in | These maximum fillet radii will be cleared by the bearing corners. |
| R - Cone Backface "To Clear" Radius | 2.030 mm | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 0.050 in | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 1.27 mm | These maximum fillet radii will be cleared by the bearing corners. |
| da - Cone Frontface Backing Diameter | 2.01 in | |
| da - Cone Frontface Backing Diameter | 51.05 mm | |
| db - Cone Backface Backing Diameter | 2.17 in | |
| db - Cone Backface Backing Diameter | 55.12 mm | |
| Da - Cup Frontface Backing Diameter | 3.34 in | |
| Da - Cup Frontface Backing Diameter | 84.10 mm | |
| Db - Cup Backface Backing Diameter | 3.19 in | |
| Db - Cup Backface Backing Diameter | 81.03 mm | |
| Ab - Cage-Cone Frontface Clearance | 0.04 in | |
| Ab - Cage-Cone Frontface Clearance | 1.02 mm | |
| Aa - Cage-Cone Backface Clearance | 0.02 in | |
| Aa - Cage-Cone Backface Clearance | 0.51 mm | |
| a - Effective Center Location | -0.17 in | Negative value indicates effective center inside cone backface. |
| a - Effective Center Location | -4.30 mm | Negative value indicates effective center inside cone backface. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 5930 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 26400 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 22900 lbf | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 102000 N | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C0 - Static Radial Rating | 21500 lbf | |
| C0 - Static Radial Rating | 95800 N | |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 3250 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 14400 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| K - Factor | 1.83 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| e - ISO Factor | 0.32 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y - ISO Factor | 1.88 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G1 - Heat Generation Factor (Roller-Raceway) | 33.8 | |
| G2 - Heat Generation Factor (Rib-Roller End) | 14 | |
| Cg - Geometry Factor | 0.0773 |
