EE126098 - 126151CD产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Series | 126000 | |
| Cone Part Number | EE126098 | |
| Cup Part Number | 126151CD | |
| Design Units | Imperial | |
| Bearing Weight | 135.6094 lb | |
| Bearing Weight | 61.5113 Kg | |
| Cage Type | Stamped Steel | |
| D - Cup Outer Diameter | 15.0000 in | |
| D - Cup Outer Diameter | 381.000 mm | |
| d - Cone Bore | 9.8130 in | |
| d - Cone Bore | 249.250 mm | |
| B - Cone Width | 3.0000 in | |
| B - Cone Width | 76.200 mm | |
| C - Double Cup Width | 5.0000 in | |
| C - Double Cup Width | 127.000 mm | |
| T - Bearing Width across Cones | 6.7500 in | |
| T - Bearing Width across Cones | 171.450 mm | |
| Z - Number of Rollers Per Row | 29 | |
| Ka - Locking Pin Diameter | 1.5 in | |
| Ka - Locking Pin Diameter | 38.1 mm | |
| Kb - Locking Pin Depth | 0.5 in | |
| Kb - Locking Pin Depth | 12.7 mm | |
| R - Cone Backface "To Clear" Radius | 0.250 in | These maximum fillet radii will be cleared by the bearing corners. |
| R - Cone Backface "To Clear" Radius | 6.400 mm | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Frontface "To Clear" Radius | 0.06 in | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Frontface "To Clear" Radius | 1.5 mm | These maximum fillet radii will be cleared by the bearing corners. |
| db - Cone Backface Backing Diameter | 10.98 in | |
| db - Cone Backface Backing Diameter | 278.90 mm | |
| Da - Cup Frontface Backing Diameter | 14.25 in | |
| Da - Cup Frontface Backing Diameter | 361.95 mm | |
| Aa - Cage-Cone Backface Clearance | 0.52 in | |
| Aa - Cage-Cone Backface Clearance | 13.20 mm | |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) | 52900 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) | 235000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) | 355000 lbf | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) | 1580000 N | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) | 92100 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) | 410000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 46800 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 208000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| K - Factor | 1.13 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| e - ISO Factor | 1.17 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y1 - ISO Factor | 0.58 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y1 - ISO Factor | 0.86 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y2 - ISO Factor | 0.86 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G1 - Heat Generation Factor (Roller-Raceway) | 1320 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G2 - Heat Generation Factor (Rib-Roller End) | 169 | |
| Cg - Geometry Factor | 0.164 | Geometry constant for Lubrication Life Adjustment Factor a3l. |
