TIMKEN（铁姆肯）

您的位置：

46790 - 46720-B TIMKEN 圆锥滚子轴承

专业销售TIMKEN圆锥滚子轴承46790 - 46720-B，并且为客户提供属于TIMKEN圆锥滚子轴承。本公司专业提供TIMKEN圆锥滚子轴承全系列产品。并且提供对此类产品的极限转速、过程打包、过程号、固定的内圈(轴圈)负荷、调心座圈、等具体参数。构成元素：单列系列法兰英 TSF 带 46720-B 46790 。类似型号：SNW-3026 x 4 1/2、 UCT208-25、紧定套 HA3126558 - 552-B、 QAAPL20A100S、轴承附件 SNW-40 x 7 1/4、推卸套 AH3076G、TIMKEN HE2334 TIMKEN QAACW13A060S TIMKEN SNT 518-615 - 21315K - TSNG615 产品应用：Two and three wheelers 、太阳能、风力发电机、农业、矿山机械、工程机械。应用设备：炒板栗机、节流阀、传动件、输送带/传送带、工具、其他污水处理设备、果蔬加工设备、污水泵、环保设备、食品机械/饮料机械。

型号

尺寸图
型号列表
规格表
供应商

46790 - 46720-B产品参数

参数	数据	说明
Series	46700
Cone Part Number	46790
Cup Part Number	46720-B
Design Units	Imperial
Bearing Weight	10.3000 lb
Bearing Weight	4.7000 Kg
Cage Type	Stamped Steel
D - Cup Outer Diameter	8.8750 in
D - Cup Outer Diameter	225.425 mm
D1 - Flange Outer Diameter	9.0898 in
D1 - Flange Outer Diameter	230.881 mm
d - Cone Bore	6.5000 in
d - Cone Bore	165.100 mm
B - Cone Width	1.5625 in
B - Cone Width	39.688 mm
C - Cup Width	1.3125 in
C - Cup Width	33.338 mm
C1 - Cup Flange Width	0.2188 in
C1 - Cup Flange Width	5.558 mm
T1 - Bearing Width	1.6250 in
T1 - Bearing Width	41.275 mm
T - Bearing Width to Flange	0.5313 in
T - Bearing Width to Flange	13.495 mm
Z - Number of Rollers Per Row	42
R - Cone Backface "To Clear" Radius	0.140 in	These maximum fillet radii will be cleared by the bearing corners.
R - Cone Backface "To Clear" Radius	3.600 mm	These maximum fillet radii will be cleared by the bearing corners.
r - Cup Backface "To Clear" Radius	0.130 in	These maximum fillet radii will be cleared by the bearing corners.
r - Cup Backface "To Clear" Radius	3.30 mm	These maximum fillet radii will be cleared by the bearing corners.
da - Cone Frontface Backing Diameter	6.85 in
da - Cone Frontface Backing Diameter	174.00 mm
db - Cone Backface Backing Diameter	7.13 in
db - Cone Backface Backing Diameter	181.10 mm
Da - Cup Frontface Backing Diameter	8.63 in
Da - Cup Frontface Backing Diameter	218.95 mm
Ab - Cage-Cone Frontface Clearance	0.08 in
Ab - Cage-Cone Frontface Clearance	2.00 mm
Aa - Cage-Cone Backface Clearance	0.16 in
Aa - Cage-Cone Backface Clearance	4.10 mm
a - Effective Center Location	0.10 in	Negative value indicates effective center inside cone backface.
a - Effective Center Location	2.50 mm	Negative value indicates effective center inside cone backface.
C90 - Dynamic Radial Rating (90 million revolutions)	17700 lbf	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
C90 - Dynamic Radial Rating (90 million revolutions)	78600 N	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
C1 - Dynamic Radial Rating (1 million revolutions)	68200 lbf	Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
C1 - Dynamic Radial Rating (1 million revolutions)	303000 N	Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
C0 - Static Radial Rating	143000 lbf
C0 - Static Radial Rating	635000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)	11600 lbf	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
Ca90 - Dynamic Thrust Rating (90 million revolutions)	51600 N	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
K - Factor	1.52	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
e - ISO Factor	0.38	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
Y - ISO Factor	1.57	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
G1 - Heat Generation Factor (Roller-Raceway)	572	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
G2 - Heat Generation Factor (Rib-Roller End)	175
Cg - Geometry Factor	0.143	Geometry constant for Lubrication Life Adjustment Factor a3l.