X32226M - Y32226M产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Series | 32226 | |
| Cone Part Number | X32226M | |
| Cup Part Number | Y32226M | |
| Design Units | Metric | |
| Bearing Weight | 11.4000 Kg | |
| Bearing Weight | 25.1000 lb | |
| Cage Type | Stamped Steel | |
| D - Cup Outer Diameter | 230.000 mm | |
| D - Cup Outer Diameter | 9.0551 in | |
| d - Cone Bore | 130.000 mm | |
| d - Cone Bore | 5.1181 in | |
| B - Cone Width | 64.000 mm | |
| B - Cone Width | 2.5197 in | |
| C - Cup Width | 54.000 mm | |
| C - Cup Width | 2.1260 in | |
| T - Bearing Width | 67.500 mm | |
| T - Bearing Width | 2.6575 in | |
| Z - Number of Rollers Per Row | 20 | |
| R - Cone Backface "To Clear" Radius | 4.060 mm | These maximum fillet radii will be cleared by the bearing corners. |
| R - Cone Backface "To Clear" Radius | 0.160 in | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 3.05 mm | These maximum fillet radii will be cleared by the bearing corners. |
| r - Cup Backface "To Clear" Radius | 0.120 in | These maximum fillet radii will be cleared by the bearing corners. |
| da - Cone Frontface Backing Diameter | 145.03 mm | |
| da - Cone Frontface Backing Diameter | 5.71 in | |
| db - Cone Backface Backing Diameter | 161.04 mm | |
| db - Cone Backface Backing Diameter | 6.34 in | |
| Da - Cup Frontface Backing Diameter | 219.20 mm | |
| Da - Cup Frontface Backing Diameter | 8.63 in | |
| Db - Cup Backface Backing Diameter | 205.99 mm | |
| Db - Cup Backface Backing Diameter | 8.11 in | |
| Ab - Cage-Cone Frontface Clearance | 6.10 mm | |
| Ab - Cage-Cone Frontface Clearance | 0.24 in | |
| Aa - Cage-Cone Backface Clearance | 5.08 mm | |
| Aa - Cage-Cone Backface Clearance | 0.20 in | |
| a - Effective Center Location | -11.90 mm | Negative value indicates effective center inside cone backface. |
| a - Effective Center Location | -0.47 in | Negative value indicates effective center inside cone backface. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 177000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C90 - Dynamic Radial Rating (90 million revolutions) | 39800 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 682000 N | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C1 - Dynamic Radial Rating (1 million revolutions) | 153000 lbf | Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
| C0 - Static Radial Rating | 982000 N | |
| C0 - Static Radial Rating | 221000 lbf | |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 132000 N | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| Ca90 - Dynamic Thrust Rating (90 million revolutions) | 29600 lbf | Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
| K - Factor | 1.34 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| e - ISO Factor | 0.44 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y - ISO Factor | 1.38 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| G1 - Heat Generation Factor (Roller-Raceway) | 424.6 | |
| G2 - Heat Generation Factor (Rib-Roller End) | 78.3 | |
| Cg - Geometry Factor | 0.129 |
