TIMKEN（铁姆肯）

您的位置：

2585 - 2523-B TIMKEN 圆锥滚子轴承

专业销售TIMKEN圆锥滚子轴承2585 - 2523-B，并且为客户提供属于TIMKEN圆锥滚子轴承。本公司专业提供TIMKEN圆锥滚子轴承全系列产品。并且提供对此类产品的零位设置、基本额定负荷、夹具、滚子和保持架向心（推力）组件、圆锥外圈小内径、等具体参数。构成元素：单列系列法兰英制 TSF 带 2523-B 2585 。类似型号：UCT208-25、 SNW-3026 x 4 1/2、紧定套 HA3126QAAPL20A100S、 558 - 552-B、轴承附件 SNW-40 x 7 1/4、推卸套 AH3076G、TIMKEN HE2334 TIMKEN SNT 518-615 - 21315K - TSNG615 TIMKEN QAACW13A060S 产品应用：机床、采矿、电动机（电机）、水泥与选矿、船舶。应用设备：电炸炉、棉麻毛初加工设备、丝印机、其他铸造及热处理设备、截止阀、油水分离设备、包装成型机械、风机、排风设备配件、PCB连接器、豆、乳制品加工设备。

型号

尺寸图
型号列表
规格表
供应商

2585 - 2523-B产品参数

参数	数据	说明
Series	2500
Cone Part Number	2585
Cup Part Number	2523-B
Design Units	Imperial
Bearing Weight	0.50 lb
Bearing Weight	0.200 Kg
Cage Type	Stamped Steel
D - Cup Outer Diameter	2.7500 in
D - Cup Outer Diameter	69.850 mm
D1 - Flange Outer Diameter	2.9020 in
D1 - Flange Outer Diameter	73.711 mm
d - Cone Bore	1.3125 in
d - Cone Bore	33.338 mm
B - Cone Width	0.9983 in
B - Cone Width	25.357 mm
C - Cup Width	0.7500 in
C - Cup Width	19.050 mm
C1 - Cup Flange Width	0.1560 in
C1 - Cup Flange Width	3.962 mm
T1 - Bearing Width	0.9378 in
T1 - Bearing Width	23.820 mm
T - Bearing Width to Flange	0.3438 in
T - Bearing Width to Flange	8.733 mm
Z - Number of Rollers Per Row	16
R - Cone Backface "To Clear" Radius	0.140 in	These maximum fillet radii will be cleared by the bearing corners.
R - Cone Backface "To Clear" Radius	3.600 mm	These maximum fillet radii will be cleared by the bearing corners.
r - Cup Backface "To Clear" Radius	0.060 in	These maximum fillet radii will be cleared by the bearing corners.
r - Cup Backface "To Clear" Radius	1.50 mm	These maximum fillet radii will be cleared by the bearing corners.
da - Cone Frontface Backing Diameter	1.54 in
da - Cone Frontface Backing Diameter	39.10 mm
db - Cone Backface Backing Diameter	1.77 in
db - Cone Backface Backing Diameter	45.00 mm
Da - Cup Frontface Backing Diameter	2.62 in
Da - Cup Frontface Backing Diameter	66.04 mm
Ab - Cage-Cone Frontface Clearance	0.03 in
Ab - Cage-Cone Frontface Clearance	0.80 mm
Aa - Cage-Cone Backface Clearance	0.04 in
Aa - Cage-Cone Backface Clearance	1.00 mm
a - Effective Center Location	-0.34 in	Negative value indicates effective center inside cone backface.
a - Effective Center Location	-8.60 mm	Negative value indicates effective center inside cone backface.
C90 - Dynamic Radial Rating (90 million revolutions)	4880 lbf	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
C90 - Dynamic Radial Rating (90 million revolutions)	21700 N	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
C1 - Dynamic Radial Rating (1 million revolutions)	18800 lbf	Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
C1 - Dynamic Radial Rating (1 million revolutions)	83700 N	Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
C0 - Static Radial Rating	21200 lbf
C0 - Static Radial Rating	94400 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)	2280 lbf	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
Ca90 - Dynamic Thrust Rating (90 million revolutions)	10200 N	Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
K - Factor	2.14	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
e - ISO Factor	0.27	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
Y - ISO Factor	2.19	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
G1 - Heat Generation Factor (Roller-Raceway)	23.6	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
G2 - Heat Generation Factor (Rib-Roller End)	9.63
Cg - Geometry Factor	0.0656	Geometry constant for Lubrication Life Adjustment Factor a3l.