SDAF 22244产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Diameter S-2 | 9 9/16 | |
| Diameter S-3 | 8 5/16 | |
| A | 9.5000 in | |
| B | 32.0000 in | |
| C | 11.2500 in | |
| D | 3.5000 in | |
| E Max. | 27.8750 in | |
| E Min. | 25.6250 in | |
| F | 7.25 in | |
| H | 19.2500 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Oil Level K | 3.3750 in | |
| L | 11.8750 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Y | 3.5313 in | |
| No. of Base Bolts Required | 4 | |
| Bolt Hole Length | 2.625 in | |
| Bolt Hole Width | 1.5 in | |
| Size of Base Bolts Required | 1.5 in | |
| Bearing Number | 22244 | |
| Locknut | AN44 | |
| Lockwasher | W44 | |
| Housing Only | SDAF244 | "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size. |
| Stabilizing Ring 1 Req’d | SR-44-38 | Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting. |
| Triple Seal 2 Req’d at S-2 | LER248 | |
| Triple Seal 2 Req’d at S-3 | LER239 | |
| Assembly Weight | 650.000 lb |
