FSAF 22220产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Diameter S-2 | 4 1/2 | |
| Diameter S-3 | 3 13/16 | |
| A | 4.5000 in | |
| B | 15.2500 in | |
| C | 4.375 in | |
| D | 1.75 in | |
| E Max. | 13.1250 in | |
| E Min. | 11.6250 in | |
| F | 2.375 in | |
| H | 8.6875 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Oil Level K | 1.7500 in | |
| L | 6.0000 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Y | 1.7656 in | |
| No. of Base Bolts Required | 4 | |
| Size of Base Bolts Required | 3.4 in | |
| Bearing Number | 22220 | |
| Locknut | AN20 | |
| Lockwasher | W20 | |
| Housing Only | FSAF220 | "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size. |
| Bolt Hole Length | 1.5 in | |
| Bolt Hole Width | 0.750 in | |
| Stabilizing Ring 1 Req’d | SR-20-17 | Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting. |
| Triple Seal 2 Req’d at S-2 | LER118 | |
| Triple Seal 2 Req’d at S-3 | LER106 | |
| Assembly Weight | 71.000 lb |
