SDAF 22326产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Diameter S-2 | 5 7/8 | |
| Diameter S-3 | 4 15/16 | |
| A | 6.6875 in | |
| B | 22.00 in | |
| C | 8.250 in | |
| D | 2.50 in | |
| E Max. | 19.2500 in | |
| E Min. | 17.3750 in | |
| F | 5 in | |
| H | 13.6875 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Oil Level K | 2.6250 in | |
| L | 8.7500 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Y | 2.4219 in | |
| No. of Base Bolts Required | 4 | |
| Bolt Hole Length | 2.0625 in | |
| Bolt Hole Width | 1.125 in | |
| Size of Base Bolts Required | 1.125 in | |
| Bearing Number | 22326 | |
| Locknut | AN26 | |
| Lockwasher | W26 | |
| Housing Only | SDAF326 | "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size. |
| Stabilizing Ring 1 Req’d | SR-0-26 | Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting. |
| Triple Seal 2 Req’d at S-2 | LER136 | |
| Triple Seal 2 Req’d at S-3 | LER122 | |
| Assembly Weight | 280.000 lb |
