SAF 22230产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Diameter S-2 | 6 5/8 | |
| Diameter S-3 | 5 3/4 | |
| A | 6.3125 in | |
| B | 21.2500 in | |
| C | 6.250 in | |
| D | 2.50 in | |
| E Max. | 18.2500 in | |
| E Min. | 17.0000 in | |
| F | 3.75 in | |
| H | 12.5000 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Oil Level K | 2.1875 in | |
| L | 8.3750 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Y | 2.5781 in | |
| No. of Base Bolts Required | 4 | |
| Size of Base Bolts Required | 1 in | |
| Bearing Number | 22230 | |
| Locknut | AN30 | |
| Lockwasher | W30 | |
| Housing Only | SAF230 | "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size. |
| Bolt Hole Length | 1.625 in | |
| Bolt Hole Width | 1.000 in | |
| Stabilizing Ring 1 Req’d | SR-30-0 | Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting. |
| Triple Seal 2 Req’d at S-2 | LER151 | |
| Triple Seal 2 Req’d at S-3 | LER134 | |
| Assembly Weight | 175.000 lb |
