SAF 22334产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Diameter S-2 | 7 7/16 | |
| Diameter S-3 | 6 7/16 | |
| A | 8.2500 in | |
| B | 29.5000 in | |
| C | 8.000 in | |
| D | 3.3750 in | |
| E Max. | 25.0000 in | |
| E Min. | 22.5000 in | |
| F | 5 in | |
| H | 17.1875 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Oil Level K | 3.0625 in | |
| L | 10.8125 in | Tolerance -0 to + 0.4 mm (-0 to +1/64 in) |
| Y | 3.5938 in | |
| No. of Base Bolts Required | 4 | |
| Size of Base Bolts Required | 1.25 in | |
| Bearing Number | 22334 | |
| Locknut | AN34 | |
| Lockwasher | W34 | |
| Housing Only | SAF334 | "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size. |
| Bolt Hole Length | 2.5 in | |
| Bolt Hole Width | 1.250 in | |
| Stabilizing Ring 1 Req’d | SR-40-34 | Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting. |
| Triple Seal 2 Req’d at S-2 | LER161 | |
| Triple Seal 2 Req’d at S-3 | LER148 | |
| Assembly Weight | 465.000 lb |
