DVPF26K407S产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Engineering Group | Mounted Bearing | |
| Bearing Number | 22226 | |
| Shaft Size | 4-7/16 in | |
| Shaft Size Type | Imperial | |
| Weight | 137 lb | |
| Weight | 62.1 Kg | |
| Locking Style | Tapered Adapter | |
| Full Timken Part Number | DVPF26K407S DVPF26K407SB DVPF26K407SC DVPF26K407SEB DVPF26K407SEC DVPF26K407SEM DVPF26K407SEN DVPF26K407SEO DVPF26K407SET DVPF26K407SM DVPF26K407SN DVPF26K407SO DVPF26K407ST | |
| Housing Style | Four-Bolt Pillow | |
| Dimension A | 4.75 in | |
| Dimension A | 120.7 mm | |
| Dimension B | 9.87 in | |
| Dimension B | 250.7 mm | |
| Dimension C | 6.50 in | |
| Dimension C | 165.1 mm | |
| Dimension D Max | 14.50 in | |
| Dimension D Max | 368.3 mm | |
| Dimension D Min | 11.90 in | |
| Dimension D Min | 302.3 mm | |
| Dimension E | 2.50 in | |
| Dimension E | 63.5 mm | |
| Dimension F | 16.13 in | |
| Dimension F | 409.7 mm | |
| Dimension G | 4.75 in | |
| Dimension G | 120.7 mm | |
| Dimension H | 1.58 in | |
| Dimension H | 40.1 mm | |
| Dimension J (Bolt Size) | 0.750 in | |
| Dimension J (Bolt Size) | 20 mm | |
| Dimension L | 4.87 in | |
| Dimension L | 123.7 mm | |
| Dimension M | 2.83 in | |
| Dimension M | 71.9 mm | |
| Dimension S | 4.73 in | |
| Dimension S | 120.1 mm | |
| C - Dynamic Load (Basic) | 170000 lb | |
| C - Dynamic Load (Basic) | 757 kN | |
| C0 - Static Load | 212000 lb | |
| C0 - Static Load | 945 kN | |
| e - Geometry Factor | 0.26 | |
| Y1 - Geometry Factor | 2.62 | |
| Y2 - Geometry Factor | 3.90 | |
| Oil Lubrication - M/N Seal | 700 rpm | |
| Oil Lubrication - T Seal | 1500 rpm | |
| Oil Lubrication - B/C/O Seal | 400 rpm | |
| Grease Lubrication - M/N Seal | 700 rpm | |
| Grease Lubrication - T Seal | 1000 rpm | |
| Grease Lubrication - B/C/O Seal | 400 rpm | |
| Float | 0.083 in | |
| Float | 2.108 mm | |
| Shaft Tolerance | 0.0040 in | |
| Shaft Tolerance | 0.102 mm | |
| Pre Install Clearance Min | 0.0063 in | |
| Pre Install Clearance Min | 0.160 mm | |
| Pre Install Clearance Max | 0.0079 in | |
| Pre Install Clearance Max | 0.201 mm | |
| Int Radial Clearance Reduction Min | 0.0025 in | |
| Int Radial Clearance Reduction Min | 0.064 mm | |
| Int Radial Clearance Reduction Max | 0.0035 in | |
| Int Radial Clearance Reduction Max | 0.089 mm | |
| Adapter Sleeve Axial Movement Min | 0.035 in | |
| Adapter Sleeve Axial Movement Min | 0.889 mm | |
| Adapter Sleeve Axial Movement Max | 0.050 in | |
| Adapter Sleeve Axial Movement Max | 1.270 mm | |
| Post Install Int Radial Clearance Min | 0.0030 in | |
| Post Install Int Radial Clearance Min | 0.076 mm |
