TAPK22K400S产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Engineering Group | Mounted Bearing | |
| Bearing Number | 22222 | |
| Shaft Size | 4 in | |
| Shaft Size Type | Imperial | |
| Weight | 87 lb | |
| Weight | 39.5 Kg | |
| Locking Style | Tapered Adapter | |
| Full Timken Part Number | TAPK22K400S TAPK22K400SB TAPK22K400SC TAPK22K400SEB TAPK22K400SEC TAPK22K400SEM TAPK22K400SEN TAPK22K400SEO TAPK22K400SET TAPK22K400SM TAPK22K400SN TAPK22K400SO TAPK22K400ST | |
| Housing Style | Four-Bolt Pillow | |
| Dimension A | 5.75 in | |
| Dimension A | 146.1 mm | |
| Dimension B | 10.78 in | |
| Dimension B | 273.8 mm | |
| Dimension C | 5.71 in | |
| Dimension C | 145.0 mm | |
| Dimension D Max | 15.56 in | |
| Dimension D Max | 395.2 mm | |
| Dimension D Min | 13.94 in | |
| Dimension D Min | 354.1 mm | |
| Dimension E | 4.00 in | |
| Dimension E | 101.6 mm | |
| Dimension F | 18.50 in | |
| Dimension F | 469.9 mm | |
| Dimension G | 6.25 in | |
| Dimension G | 158.8 mm | |
| Dimension H | 1.80 in | |
| Dimension H | 45.7 mm | |
| Dimension L | 5.44 in | |
| Dimension L | 138.2 mm | |
| Dimension M | 2.48 in | |
| Dimension M | 63.0 mm | |
| Dimension S | 4.13 in | |
| Dimension S | 104.9 mm | |
| C - Dynamic Load (Basic) | 125000 lb | |
| C - Dynamic Load (Basic) | 555 kN | |
| C0 - Static Load | 147000 lb | |
| C0 - Static Load | 653 kN | |
| e - Geometry Factor | 0.25 | |
| Y1 - Geometry Factor | 2.73 | |
| Y2 - Geometry Factor | 4.06 | |
| Oil Lubrication - M/N Seal | 900 rpm | |
| Oil Lubrication - T Seal | 1700 rpm | |
| Oil Lubrication - B/C/O Seal | 600 rpm | |
| Grease Lubrication - M/N Seal | 900 rpm | |
| Grease Lubrication - T Seal | 1200 rpm | |
| Grease Lubrication - B/C/O Seal | 600 rpm | |
| Float | 0.083 in | |
| Float | 2.108 mm | |
| Shaft Tolerance | 0.0040 in | |
| Shaft Tolerance | 0.102 mm | |
| Pre Install Clearance Min | 0.0053 in | |
| Pre Install Clearance Min | 0.135 mm | |
| Pre Install Clearance Max | 0.0067 in | |
| Pre Install Clearance Max | 0.170 mm | |
| Int Radial Clearance Reduction Min | 0.0020 in | |
| Int Radial Clearance Reduction Min | 0.051 mm | |
| Int Radial Clearance Reduction Max | 0.0028 in | |
| Int Radial Clearance Reduction Max | 0.071 mm | |
| Adapter Sleeve Axial Movement Min | 0.03 in | |
| Adapter Sleeve Axial Movement Min | 0.762 mm | |
| Adapter Sleeve Axial Movement Max | 0.042 in | |
| Adapter Sleeve Axial Movement Max | 1.067 mm | |
| Post Install Int Radial Clearance Min | 0.0025 in | |
| Post Install Int Radial Clearance Min | 0.064 mm |
