TAPKT13K204S产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Engineering Group | Mounted Bearing | |
| Bearing Number | 22213 | |
| Shaft Size | 2-1/4 in | |
| Shaft Size Type | Imperial | |
| Weight | 22 lb | |
| Weight | 10.0 Kg | |
| Locking Style | Tapered Adapter | |
| Full Timken Part Number | TAPKT13K204S TAPKT13K204SB TAPKT13K204SC TAPKT13K204SEB TAPKT13K204SEC TAPKT13K204SEM TAPKT13K204SEN TAPKT13K204SEO TAPKT13K204SET TAPKT13K204SM TAPKT13K204SN TAPKT13K204SO TAPKT13K204ST | |
| Housing Style | Two-Bolt Pillow | |
| Dimension A | 3.0000 in | |
| Dimension A | 76.2 mm | |
| Dimension B | 6.05 in | |
| Dimension B | 153.7 mm | |
| Dimension C | 3.35 in | |
| Dimension C | 85.1 mm | |
| Dimension D Max | 8.78 in | |
| Dimension D Max | 223.0 mm | |
| Dimension D Min | 7.66 in | |
| Dimension D Min | 194.6 mm | |
| Dimension F | 11.25 in | |
| Dimension F | 285.8 mm | |
| Dimension G | 2.90 in | |
| Dimension G | 73.7 mm | |
| Dimension H | 1.38 in | |
| Dimension H | 35.1 mm | |
| Dimension J (Bolt Size) | 0.750 in | |
| Dimension J (Bolt Size) | 20 mm | |
| Dimension L | 3.01 in | |
| Dimension L | 76.5 mm | |
| Dimension M | 1.56 in | |
| Dimension M | 39.6 mm | |
| Dimension S | 2.56 in | |
| Dimension S | 65.0 mm | |
| C - Dynamic Load (Basic) | 46400 lb | |
| C - Dynamic Load (Basic) | 206 kN | |
| C0 - Static Load | 48600 lb | |
| C0 - Static Load | 216 kN | |
| e - Geometry Factor | 0.24 | |
| Y1 - Geometry Factor | 2.79 | |
| Y2 - Geometry Factor | 4.15 | |
| Oil Lubrication - M/N Seal | 1800 rpm | |
| Oil Lubrication - T Seal | 3200 rpm | |
| Oil Lubrication - B/C/O Seal | 1500 rpm | |
| Grease Lubrication - M/N Seal | 1800 rpm | |
| Grease Lubrication - T Seal | 2800 rpm | |
| Grease Lubrication - B/C/O Seal | 1500 rpm | |
| Float | 0.05 in | |
| Float | 1.27 mm | |
| Shaft Tolerance | 0.0030 in | |
| Shaft Tolerance | 0.076 mm | |
| Pre Install Clearance Min | 0.0030 in | |
| Pre Install Clearance Min | 0.075 mm | |
| Pre Install Clearance Max | 0.0037 in | |
| Pre Install Clearance Max | 0.094 mm | |
| Int Radial Clearance Reduction Min | 0.0012 in | |
| Int Radial Clearance Reduction Min | 0.030 mm | |
| Int Radial Clearance Reduction Max | 0.0015 in | |
| Int Radial Clearance Reduction Max | 0.038 mm | |
| Adapter Sleeve Axial Movement Min | 0.018 in | |
| Adapter Sleeve Axial Movement Min | 0.5 mm | |
| Adapter Sleeve Axial Movement Max | 0.022 in | |
| Adapter Sleeve Axial Movement Max | 0.6 mm | |
| Post Install Int Radial Clearance Min | 0.0015 in | |
| Post Install Int Radial Clearance Min | 0.038 mm |
