TIMKEN（铁姆肯）

您的位置：

24176EMBW33W40EW45 TIMKEN 调心滚子轴承

专业销售TIMKEN调心滚子轴承24176EMBW33W40EW45，并且为客户提供属于TIMKEN调心滚子轴承。本公司专业提供TIMKEN调心滚子轴承全系列产品。并且提供对此类产品的惯性、外圈背面(前面)倒角、内圈、保持架和球（滚子）组件、变频、锻、等具体参数。构成元素：Spherical R 。类似型号：SNW-3026 x 4 1/2、 UCT208-25、紧定套 HA3126558 - 552-B、 QAAPL20A100S、推卸套 AH3076G、轴承附件 SNW-40 x 7 1/4、TIMKEN QAACW13A060S TIMKEN SNT 518-615 - 21315K - TSNG615 TIMKEN HE2334 产品应用：航空航天、摩托车、航空航天、卡车、挂车和公共汽车、冶金。应用设备：葡萄酒设备、离子风机、粮食加工设备、机加工、工业电炉、节能、环保设备、分析仪器、临床检验分析仪器、纺纱设备(纺机)、焊接、切割设备材料。

型号

尺寸图
型号列表
规格表
供应商

24176EMBW33W40EW45产品参数

参数	数据	说明
Design Unit	Metric
Bearing Weight	292.0000 Kg
Bearing Weight	643.7000 lb
Cage Type	EMB
Cage Material	BRASS
Superseded Part	24176YMBW33W40EW45
D - Outer Diameter	620.000 mm
D - Outer Diameter	24.4094 in
d - Bore	380.000 mm
d - Bore	14.9606 in
B' - Inner Ring Width	243.000 mm
B' - Inner Ring Width	9.5669 in
B - Outer Ring Width	243.000 mm
B - Outer Ring Width	9.5669 in
Z - Number of Rollers Per Row	23
R - Inner Ring "To Clear" Radius	4.00 mm	Maximum housing fillet radius that bearing corners will clear.
R - Inner Ring "To Clear" Radius	0.16 in	Maximum housing fillet radius that bearing corners will clear.
r - Outer Ring "To Clear" Radius	4.00 mm	Maximum shaft fillet radius that bearing corners will clear.
r - Outer Ring "To Clear" Radius	0.16 in	Maximum shaft fillet radius that bearing corners will clear.
da - Inner Ring Backing Diameter	426.7 mm
da - Inner Ring Backing Diameter	16.80 in
Da - Outer Ring Backing Diameter	565.30 mm
Da - Outer Ring Backing Diameter	22.26 in
D1 - Outer Ring Breakout Diameter	530.600 mm
D1 - Outer Ring Breakout Diameter	20.8900 in
C1(2) - Dynamic Radial Rating (Two-Rows)	5580000 N
C1(2) - Dynamic Radial Rating (Two-Rows)	1256000 lbf
C0 - Static Radial Rating	10100000 N
C0 - Static Radial Rating	2273000 lbf
e - ISO Factor	0.36	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
Y0 - ISO Factor	1.87	These factors apply for both inch and metric calculations. See engineering
Y1 - ISO Factor	2.79	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
Y2 - ISO Factor	1.83	These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
Reference Thermal Speed Rating (Grease)	300
Reference Thermal Speed Rating (Oil)	320	See thermal speed ratings in the engineering section.
Cg - Geometry Factor	0.1074	Geometry constant for Lubrication Life Adjustment Factor a3l.