22328KEMW33W800C4产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Design Unit | Metric | |
| Bore Taper | 1/12 | |
| Bearing Weight | 34.2300 Kg | |
| Bearing Weight | 75.4641 lb | |
| Cage Type | EM | |
| Cage Material | BRASS | |
| D - Outer Diameter | 299.989 mm | |
| D - Outer Diameter | 11.8106 in | |
| d - Bore | 140.000 mm | |
| d - Bore | 5.5118 in | |
| B' - Inner Ring Width | 102.000 mm | |
| B' - Inner Ring Width | 4.0157 in | |
| B - Outer Ring Width | 102.000 mm | |
| B - Outer Ring Width | 4.0157 in | |
| Z - Number of Rollers Per Row | 15 | |
| R - Inner Ring "To Clear" Radius | 3.00 mm | Maximum housing fillet radius that bearing corners will clear. |
| R - Inner Ring "To Clear" Radius | 0.12 in | Maximum housing fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 3.00 mm | Maximum shaft fillet radius that bearing corners will clear. |
| r - Outer Ring "To Clear" Radius | 0.12 in | Maximum shaft fillet radius that bearing corners will clear. |
| da - Inner Ring Backing Diameter | 181.4 mm | |
| da - Inner Ring Backing Diameter | 7.14 in | |
| Da - Outer Ring Backing Diameter | 269.8 mm | |
| Da - Outer Ring Backing Diameter | 10.62 in | |
| D1 - Outer Ring Breakout Diameter | 257.296 mm | |
| D1 - Outer Ring Breakout Diameter | 10.1298 in | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 1520000 N | |
| C1(2) - Dynamic Radial Rating (Two-Rows) | 342000 lbf | |
| C0 - Static Radial Rating | 1780000 N | |
| C0 - Static Radial Rating | 401000 lbf | |
| e - ISO Factor | 0.33 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y0 - ISO Factor | 2.01 | These factors apply for both inch and metric calculations. See engineering |
| Y1 - ISO Factor | 2.06 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Y2 - ISO Factor | 3.06 | These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
| Reference Thermal Speed Rating (Grease) | 1500 | |
| Reference Thermal Speed Rating (Oil) | 1700 | See thermal speed ratings in the engineering section. |
| Cg - Geometry Factor | 0.0880 | Geometry constant for Lubrication Life Adjustment Factor a3l. |
