参数 |
数据 |
说明 |
Series |
02800 |
|
Cone Part Number |
02872 |
|
Cup Part Number |
02823D |
|
Design Units |
Imperial |
|
Bearing Weight |
2.4638 lb |
|
Bearing Weight |
1.1176 Kg |
|
Cage Type |
Stamped Steel |
|
D - Cup Outer Diameter |
3.0000 in |
|
D - Cup Outer Diameter |
76.200 mm |
|
d - Cone Bore |
1.1250 in |
|
d - Cone Bore |
28.575 mm |
|
B - Cone Width |
0.8750 in |
|
B - Cone Width |
22.225 mm |
|
C - Double Cup Width |
1.5000 in |
|
C - Double Cup Width |
38.100 mm |
|
T - Bearing Width across Cones |
1.8750 in |
|
T - Bearing Width across Cones |
47.625 mm |
|
Z - Number of Rollers Per Row |
17 |
|
Ka - Locking Pin Diameter |
N/A |
|
Kb - Locking Pin Depth |
N/A |
|
R - Cone Backface "To Clear" Radius |
0.030 in |
These maximum fillet radii will be cleared by the bearing corners. |
R - Cone Backface "To Clear" Radius |
0.800 mm |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Frontface "To Clear" Radius |
0.03 in |
These maximum fillet radii will be cleared by the bearing corners. |
r - Cup Frontface "To Clear" Radius |
0.8 mm |
These maximum fillet radii will be cleared by the bearing corners. |
db - Cone Backface Backing Diameter |
1.48 in |
|
db - Cone Backface Backing Diameter |
37.60 mm |
|
Da - Cup Frontface Backing Diameter |
2.80 in |
|
Da - Cup Frontface Backing Diameter |
71.10 mm |
|
Aa - Cage-Cone Backface Clearance |
0.06 in |
|
Aa - Cage-Cone Backface Clearance |
1.50 mm |
|
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
3830 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C90 - Dynamic Radial Rating (One-Row, 90 million revolutions) |
17000 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
25700 lbf |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions) |
114000 N |
Based on 1 x 106 revolutions L10 life, for the ISO life calculation method. |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
6670 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions) |
29700 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
2980 lbf |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
13200 N |
Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value. |
K - Factor |
1.29 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
e - ISO Factor |
1 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y1 - ISO Factor |
0.68 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y1 - ISO Factor |
1.01 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
Y2 - ISO Factor |
1.01 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G1 - Heat Generation Factor (Roller-Raceway) |
20.6 |
These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use. |
G2 - Heat Generation Factor (Rib-Roller End) |
10.1 |
|
Cg - Geometry Factor |
0.074 |
Geometry constant for Lubrication Life Adjustment Factor a3l. |